APPROVED VENDOR
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 3/8...
Ball End Mill, 0.375 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 3/8...
Ball End Mill, 0.375 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 3/8...
Ball End Mill, 0.375 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 4 m...
Ball End Mill, 4 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 4.5...
Ball End Mill, 4.5 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5 m...
Ball End Mill, 5 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/3...
Ball End Mill, 0.15625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/3...
Ball End Mill, 0.15625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/3...
Ball End Mill, 0.15625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/3...
Ball End Mill, 0.15625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/6...
Ball End Mill, 0.078125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/6...
Ball End Mill, 0.078125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/6...
Ball End Mill, 0.078125 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill: Carbide, AlTiN Coated, 2 Flute, 6 m...
Ball End Mill, 6 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through