MELIN TOOL COMPANY
Ball End Mill, Single End, 1/2", Carbide
Ball End Mill, 0.5 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill, Single End, 3/16", Carbide
Ball End Mill, 0.1875 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Carbide Bur, 1/2, Sa Cylindrical No Endcut
Carbide Bur,1/2,Sa Cylindrical No Endcut, Included Angle Not Applicable
Carbide Bur, 1/2", 14 deg., Includd Cone Dc
Carbide Bur,1/2 In.,14 deg.,Included Cone Dc
Cor. Round. End Mill, 1/4" CR, Cobalt
Single, Corner Rounding End Mill, Number of Flutes 4
Corner Rounding End Mill, 0.0600", Carbide
Single, Corner Rounding End Mill, 1/2 in, Number of Flutes 4, Carbide, Uncoated,...
Countersink, Hss, Xl, 1F, 82 deg., 5/8" dia.
Countersink,Hss,Xl,1F,82 deg.,5/8 In. x
Drill Mill, Carbide, 90 deg., 1/8" x 1/2
Drill Mill,Carbide,90 deg.,1/8 In. x 1/2
Drill Point Countersink, HSS, 90 deg., 1/2"
Drill Point Countersink,HSS,90 deg.,1/2 In.
End Mill, 1/2" Dia, 1" Cut, Carbide
Square End Mill, 0.5 in Milling Dia., AlTiN, Length of Cut 1 in, Overall Length...
End Mill, 1/2" Dia, 1" Cut, Carbide
Square End Mill, 0.5 in Milling Dia., TiCN, Length of Cut 1 in, Overall Length 3...
End Mill, 1/4" Dia, 1" Cut, Carbide
Square End Mill, 0.25 in Milling Dia., AlTiN, Length of Cut 1 in, Overall Length...
End Mill, 1/4" Dia, 3/4" Cut, Carbide
Square End Mill, 0.25 in Milling Dia., TiCN, Length of Cut 0.75 in, Overall Leng...
End Mill, 1/8" Dia, 3/8" Cut, Cobalt
Square End Mill, 0.125 in Milling Dia., Uncoated, Length of Cut 0.375 in, Overal...
End Mill, 3/16" Dia, 1" Cut, Carbide
Square End Mill, 0.1875 in Milling Dia., AlTiN, Length of Cut 1 in, Overall Leng...
End Mill, 3/4" Dia, 1-5/16" Cut, Cobalt
Square End Mill, 0.75 in Milling Dia., Uncoated, Length of Cut 1.3125 in, Overal...
End Mill, 3/8" Dia, 1" Cut, Carbide
Square End Mill, 0.375 in Milling Dia., AlTiN, Length of Cut 1 in, Overall Lengt...
End Mill, 3/8" Dia, 5/8" Cut, Carbide
Square End Mill, 0.375 in Milling Dia., Uncoated, Length of Cut 0.625 in, Overal...
End Mill, 3/8" Dia, 5/8" Cut, Carbide
Square End Mill, 0.375 in Milling Dia., TiCN, Length of Cut 1 in, Overall Length...
End Mill, Carbide, GP, Square, 3/8" x 1-3/4
End Mill,Carbide,GP,Square,3/8 In. x 1-3/4, Neck Dia. Not Applicable
End Mill, HP, Carbide, Ball, 1/8" x 1/2
End Mill,HP,Carbide,Ball,1/8 In. x 1/2