WALTER TITEX
Taper Length Drill, 5.10mm, HSS
Taper Length Drill Bit, Drill Bit Size 5.1 mm, Drill Bit Point Angle 118 Degrees...
Taper Length Drill, 5.20mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.2 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.20mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.2 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.30mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.3 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.30mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.3 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.30mm, HSS
Taper Length Drill Bit, Drill Bit Size 5.3 mm, Drill Bit Point Angle 118 Degrees...
Taper Length Drill, 5.40mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.4 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.40mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.4 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.50mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.5 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.50mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.5 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.50mm, HSS
Taper Length Drill Bit, Drill Bit Size 5.5 mm, Drill Bit Point Angle 118 Degrees...
Taper Length Drill, 5.60mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.6 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.60mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.6 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.60mm, HSS
Taper Length Drill Bit, Drill Bit Size 5.6 mm, Drill Bit Point Angle 118 Degrees...
Taper Length Drill, 5.70mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.7 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.70mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.7 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.80mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.8 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.80mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.8 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.80mm, HSS
Taper Length Drill Bit, Drill Bit Size 5.8 mm, Drill Bit Point Angle 118 Degrees...
Taper Length Drill, 5.90mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.9 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5.90mm, Carbide
Taper Length Drill Bit, Drill Bit Size 5.9 mm, Drill Bit Point Angle 140 Degrees...
Taper Length Drill, 5/16", Carbide
Taper Length Drill Bit, Drill Bit Size 5/16 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 5/16", Carbide
Taper Length Drill Bit, Drill Bit Size 5/16 in, Drill Bit Point Angle 140 Degree...
Taper Length Drill, 5/32", Carbide
Taper Length Drill Bit, Drill Bit Size 5/32 in, Drill Bit Point Angle 140 Degree...