WIDIA
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 1"...
Ball End Mill, 1 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 1/2...
Ball End Mill, 0.5 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 1/2...
Ball End Mill, 0.5 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 1/4...
Ball End Mill, 0.25 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 1/8...
Ball End Mill, 0.125 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 3/1...
Ball End Mill, 0.1875 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 3/4...
Ball End Mill, 0.75 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 3/8...
Ball End Mill, 0.375 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 5/1...
Ball End Mill, 0.3125 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill: Carbide, TiAlN Coated, 4 Flute, 5/8...
Ball End Mill, 0.625 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball Milling Insert, 5/8", Carbide
Ball Nose Milling Insert, Inscribed Circle 0.625 in, Negative
Ball Nose Milling Insert: 0.197 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.236 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.315 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.375 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.375 in Inscribed Circl...
Ball Nose Milling Insert, Inscribed Circle 0.375 in, Neutral
Ball Nose Milling Insert: 0.394 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.492 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.500 in Inscribed Circl...
Ball Nose Milling Insert, Inscribed Circle 0.500 in, Neutral
Ball Nose Milling Insert: 0.500 in Inscribed Circl...
Ball Nose Milling Insert, Inscribed Circle 0.500 in, Negative
Ball Nose Milling Insert: 0.625 in Inscribed Circl...
Ball Nose Milling Insert, Inscribed Circle 0.625 in, Neutral
Ball Nose Milling Insert: 0.630 in Corner Radius,...
Ball Nose Milling Insert
Ball Nose Milling Insert: 0.750 in Inscribed Circl...
Ball Nose Milling Insert, Inscribed Circle 0.750 in, Positive