WIDIA HANITA
Roughing End Mill: Carbide, TiAlN Coated, 4 Flute,...
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, W...
Roughing End Mill: Carbide, TiAlN Coated, 4 Flute,...
Roughing End Mill, 0.625 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, W...
Roughing End Mill: Carbide, TiAlN Coated, 5 Flute,...
Roughing End Mill, 25 mm Milling Dia., Carbide, TiAlN, Weldon Flat, Metric, 0.5...
Roughing End Mill: Carbide, TiAlN Coated, 6 Flute,...
Roughing End Mill, 16 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Stra...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 0.25 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Str...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
Roughing End Mill: Carbide, TiCN Coated, 3 Flute,...
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.5 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weld...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.75 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Wel...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.375 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.3125 in Milling Dia., Carbide, TiCN, Non-Coolant Through, S...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.3125 in Milling Dia., Carbide, TiCN, Non-Coolant Through, S...
Roughing End Mill: Carbide, TiCN Coated, 4 Flute,...
Roughing End Mill, 0.625 in Milling Dia., Carbide, TiCN, Non-Coolant Through, We...
Roughing End Mill: Carbide, TiCN Coated, 5 Flute,...
Roughing End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon...
Sq End Mill, Single End, Carb
Square End Mill, Carbide, Non-Coolant Through, Neck Dia. Not Applicable
Sq End Mill, 20.00mm Dia, 30.00mm Cut
Square End Mill, 20 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straig...
Sq. End Mill
Square End Mill, 0.0625 in Milling Dia., Carbide, Uncoated, Non-Coolant Through,...