Centrifugal Pump: 7 1/2 hp, Three Phase, 230/460V AC, Cast Iron, 2 1/2 in NPT, 2 in NPT, TEFC
In Stock
$2,346.37
/each
Earn 2346 points for this item
($23.46 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 7 1/2 hp, Three Phase, 230/...
Mfr # 12A075
$2,346.37
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| Flow Rate (Maximum) | 182 gpm |
| Pump Housing Material | Cast Iron |
| Max Specific Gravity | 1 |
| Full Load Current | 17.8/8.9 A |
| Min Head | 60 ft |
| Pumping Application | Chemical Transfer, Liquid Transfer, Dewatering, Irrigation, Decorative Water |
| Manufacturer Part Number | 12A075 |
| Ozone Depleting Substance | N |
| Display Sell UOM | EA |
| Max Motor Speed | 3,450 RPM |
| Phase | Three |
| Discharge Gender | Female |
| Flow @ 60' Head | 182 gpm |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Impeller Design | Closed |
| Motor Efficiency Compliance Certification Number | CC124B |
| Service Factor | 1.25 |
| Inlet Diameter | 2-1/2 in |
| Number of Stages | 1 |
| Hazardous Location Class | Not Rated |
| Manufacturers Warranty Length | 1 yr |
| Volute Material | Cast Iron |
| Flow @ 120' Head | 123 gpm |
| Shut Off Pressure - Maximum | 65 psi |
| Storage Protection Code | A |
| Flow @ 90' Head | 160 gpm |
| Inlet Standard | NPT |
| Overall Length | 22.3 in |
| Nameplate Voltage | 230/460V AC |
| Discharge Location | Top Center |
| Overall Height | 13.2 in |
| Priming | Manual |
| Intake and Discharge Size | 2-1/2 in , 2 in |
| Discharge Orientation | Top |
| Display Qty | 1 |
| Mounting Orientation | Horizontal |
| Case Pressure - Maximum | 100 psi |
| Impeller Diameter | 5-15/16 in |
| Inlet | 2-1/2 in NPT |
| Chemical Compatibility | Non-Flammable Liquids |
| Discharge Diameter | 2 in |
| Port Connections | NPT |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow @ 80' Head | 170 gpm |
| Includes | Manual |
| Includes California Prop 65 Short-Form Warning | Y |
| Shaft Seal Material | Buna-N Elastomer, 304 Stainless Steel, Carbon/Ceramic |
| Duty Cycle | Continuous |
| Overall Width | 11.8 in |
| Seal Type | Mechanical |
| Min Flow | 123 gpm |
| Discharge Standard | NPT |
| Electrical Connection Type | Hardwired |
| Freight Class Code | 39 |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Discharge | 2 in NPT |
| Best Efficiency Flow | 136 gpm |
| Discharge Type | NPT |
| Fluid Temperature Range | 40 Degrees F to 180 Degrees F |
| Horsepower | 7-1/2 hp |
| Min Fluid Temperature | 40 Degrees F |
| Inlet Gender | Female |
| Should Sales be Restricted by Region? | N |
| Flow @ 100' Head | 150 gpm |
| Motor Frame Size | 184JM |
| Motor Enclosure Type | TEFC |
| Contains California Prop 65 Carcinogen | Y |
| Discharge Rotation Increments | 0 Degrees |
| Shaft Outer Diameter | 7/8 in |
| Inlet Position | Center |
| Wetted Material | Buna-N, Stainless Steel, Bronze, Carbon, Cast Iron, Ceramic |
| Max Ambient Temperature | 40 Degrees C |
| Inlet Type | NPT |
| Is this a Hazardous Material Product? | N |
| Shaft Material | 410 Stainless Steel/Steel |
| For Use With Potable Systems | No |
| Product Powered by Fossil Fuel | N |
| Drive Coupling Type | No Coupling |
| Feet of Head (Maximum) | 150 ft |
| Motor Design | Three-Phase |
| Standards | UL Recognized Motor |
| Max Fluid Temperature | 180 Degrees F |
| Bearing Type | Ball |
| Impeller Material | Bronze |
| Safety Data Sheet (SDS) Applicable? | N |
| Viscosity (Maximum) | 100 SUS |
| Frequency | 60 Hz |
| Solid Diameter (Maximum) | 0.35 in |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Thermal Overload Protection | Yes |
| Flow @ 70' Head | 176 gpm |
| Discharge Position | Center |
| Best Efficiency Head | 138 ft |
| Mfr. Model # | 12A075 |
Description
Centrf Pmp, 7-1/2hp, CI, 2"