Magnetic Drive Pump: 1/8 hp HP, Single Phase, 115V AC, Glass-Filled Polypropylene, OAO
In Stock
$880.50
Save 20%
$700.84
/each
Earn 700 points for this item
($7.00 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 1/8 hp HP, Single Phase,...
Mfr # 583503
$700.84
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Flow @ 3' Head | 16.5 gpm |
| Max Fluid Temperature | 150 Degrees F |
| Inlet | 1 in FNPT |
| Flow Rate (Maximum) | 17.5 gpm |
| Min Ambient Temperature | 32 Degrees F |
| Min Fluid Temperature | 32 Degrees F |
| Horsepower (Maximum) | 1/8 hp |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Best Efficiency Head | 17 ft |
| Frequency | 60 Hz |
| Case Pressure - Maximum | 11.9 psi |
| Viscosity (Maximum) | 100 SUS |
| Priming | Manual |
| Fluid Temperature Range | 32 Degrees F to 150 Degrees F |
| Phase | Single |
| Port Connections | NPT |
| Feet of Head (Maximum) | 27.5 ft |
| Manufacturers Warranty Length | 1 yr |
| Display Sell UOM | EA |
| Storage Protection Code | A |
| Full Load Current | 2 A |
| Manufacturer Part Number | 583503 |
| Flow @ 15' Head | 10.9 gpm |
| Mounting Orientation | Horizontal |
| Flow @ 6' Head | 15.3 gpm |
| Max Specific Gravity | 1.1 |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Mounting Location | Open Air |
| Discharge Gender | Male |
| Inlet Standard | NPT |
| Cord Length | 6 ft |
| Pump Drive Configuration | Close-Coupled |
| Discharge Diameter | 1/2 in |
| Impeller Diameter | 1-83/100 in |
| Hazardous Location Class | Not Rated |
| Inlet Gender | Female |
| Motor Frame Size | 42 |
| Overall Height | 5.5 in |
| Discharge Standard | NPT |
| Motor Design | Permanent Split Capacitor |
| Overall Width | 5.4 in |
| Gasket Material | Buna-N |
| Number of Stages | 1 |
| Includes California Prop 65 Short-Form Warning | Y |
| Safety Data Sheet (SDS) Applicable? | N |
| Contains California Prop 65 Carcinogen | Y |
| Inlet Type | FNPT |
| Pump Mounting Style | Base-Mounted |
| Chemical Compatibility | Mercury, Boric Acid, Lactic Acid, Syrup, Ferric Sulfate, Barium Hydroxide, Rhodium Plating, Zinc Plating, Ammonium Sulfate, Salad Dressing, Acid, Diesel Fuel, Potassium Cyanide Solutions, Carbonic Acid, Glucose, Sodium Perborate, Dibasic, Magnesium Chloride, Magnesium Carbonate, Asphalt, Olive Oil, Nickel Chloride, Copper Cyanide, Sodium Sulfate, Gold Plating, Cod Liver Oil, Lead Acetate, Calcium Hydroxide, Potassium Sulfate, Sodium Chloride, Mineral Oil, Calcium Carbonate, Ammonium Chloride, Aluminum Chloride 20%, Mercuric Chloride, Amyl Alcohol, Nitrate, Calcium Chloride, Mayonnaise, Indium Sulfamate Plating, Detergents, Paraffin, Sodium Silicate, Varnish, Aluminum Potassium Sulfate, Nickel Plating, Urine, Potassium Chlorate, Potash, Shellac, Beet Sugar Liquids, Mercuric Cyanide, Borax, Wine, Milk, Ammonium Bifluoride, Potassium Bromide, Potassium Chloride, Magnesium Nitrate, Copper Sulfate, Lard, Catsup, Antifreeze, Corn Oil, Coffee, Ammonium Hydroxide, Salt, Mine, Fuel Oil, Zinc Chloride, Barium Chloride, Copper Nitrate, Carbonated Water, Barium Carbonate, Magnesium Sulfate, Whiskey, Plating Solutions, Copper Sulfate 5%, Cream, Carbon Monoxide, Silver Plating, Nickel Sulfate, Silicone Oil, Citric Oil, Copper Pyrophosphate, Sodium Bisulfate, Ethylene Glycol, Soap, Sodium Bisulfite, Clove Oil, Calcium Sulfate, Sodium Carbonate, Sodium Cyanide, Calcium Bisulfide, Ferric Nitrate, Mustard, Ammonia, Formaldehyde 40%, Magnesium Hydroxide, Aluminum Hydroxide, Calcium Hypochlorite, Calcium Bisulfite, Coconut Oil, Rosin, Potassium Dichromate, Zinc Sulfate, Rum, Sodium Bicarbonate, Lubricants, Potassium Bicarbonate, Iron Plating, Sodium Chromate, Linseed Oil, Acetic Anhydride, Ferrous Chloride, Honey, Water, Glycerin, Sea Water, Oxalic Acid, Barium Sulfate, Aluminum Sulfate, Chocolate Syrup, Distilled, Pulp Mill, Calgon, Soybean Oil, Gelatin, Cotton Seed Oil, Potassium Carbonate, Potassium Nitrate, Naphtha, Antimony Plating, Anhydrous, Ferrous Sulfate, Stannic Chloride, Ammonium Persulfate, Barium Sulfide, Copper Chloride, Arsenic Acid, Acetaldehyde, Sugar, Silicone, Ammonium Nitrate, Sodium Thiosulphate, Orange Oil, Fruit Juice, Alcohol, Ammonium Phosphate, Rust Inhibitors, Rosin Oil, Potassium Permanganate, Aluminum Chloride, Tomato Juice, Molasses, Tribasic |
| Nameplate Voltage | 115V AC |
| Flow @ 18' Head | 9.2 gpm |
| Motor Enclosure Type | OAO |
| Best Efficiency Flow | 10 gpm |
| Display Qty | 1 |
| Ozone Depleting Substance | N |
| Pump Design | End Suction |
| Suction Port | 1 in NPT |
| Impeller Material | Polypropylene |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow @ 24' Head | 3 gpm |
| Max Ambient Temperature | 77 Degrees F |
| Inlet Diameter | 1 in |
| Is this a Hazardous Material Product? | N |
| Pumping Application | Chemical Transfer |
| Drive Coupling Type | Magnetic Coupling |
| Overall Length | 8.8 in |
| Motor Enclosure | Open Air Over |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Housing Material | Glass-Filled Polypropylene |
| Flow @ 9' Head | 14 gpm |
| Freight Class Code | 260 |
| Cord Type | 3-conductor SJP |
| Discharge | 1/2 in NPT |
| Shut Off Pressure - Maximum | 11.9 psi |
| Bearing Type | Thrust |
| Shaft Seal Type | Sealless |
| Mfr. Model # | 583503 |
Description
Magnt Drv Pmp, 1/2in, NPT, 1/8hp, Glss PP