Magnetic Drive Pump: 1/50 hp HP, Single Phase, 115V AC, Glass-Filled Polypropylene, OAO
In Stock
$397.50
Save 20%
$316.27
/each
Earn 316 points for this item
($3.16 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 1/50 hp HP, Single Phase...
Mfr # 581030
$316.27
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Flow @ 6' Head | 3.3 gpm |
| Min Fluid Temperature | 32 Degrees F |
| Phase | Single |
| Storage Protection Code | A |
| Flow Rate (Maximum) | 5.75 gpm |
| Max Specific Gravity | 1.1 |
| Ozone Depleting Substance | N |
| Inlet Type | GHT |
| Number of Stages | 1 |
| Pumping Application | Chemical Transfer |
| Overall Height | 5.3 in |
| Discharge Diameter | 5/8 in |
| Overall Width | 3.5 in |
| Cord Length | 6 ft |
| Overall Length | 7.6 in |
| Motor Enclosure | Open Air Over |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Shaft Seal Type | Sealless |
| Is this a Hazardous Material Product? | N |
| Inlet | 5/8 in GHT |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Shut Off Pressure - Maximum | 3 psi |
| Discharge Gender | Male |
| Hazardous Location Class | Not Rated |
| Contains California Prop 65 Carcinogen | Y |
| Nameplate Voltage | 115V AC |
| Motor Design | Shaded Pole |
| Pump Mounting Style | Base-Mounted |
| Display Qty | 1 |
| Discharge Standard | Hose |
| Inlet Gender | Female |
| Mounting Orientation | Horizontal |
| Discharge | 5/8 in Hose |
| Inlet Diameter | 5/8 in |
| Flow @ 3' Head | 5 gpm |
| Horsepower (Maximum) | 1/50 hp |
| Drive Coupling Type | Magnetic Coupling |
| Max Ambient Temperature | 77 Degrees F |
| Feet of Head (Maximum) | 7 ft |
| Inlet Standard | Hose |
| Gasket Material | Buna-N |
| Chemical Compatibility | Plating Solutions, Boric Acid, Lactic Acid, Copper Sulfate 5%, Ferric Sulfate, Barium Hydroxide, Zinc Plating, Ammonium Sulfate, Silver Plating, Nickel Sulfate, Copper Pyrophosphate, Potassium Cyanide Solutions, Sodium Bisulfate, Soap, Sodium Bisulfite, Calcium Sulfate, Dibasic, Sodium Cyanide, Sodium Carbonate, Magnesium Chloride, Calcium Bisulfide, Ammonia, Formaldehyde 40%, Magnesium Hydroxide, Calcium Hypochlorite, Calcium Bisulfite, Nickel Chloride, Potassium Dichromate, Zinc Sulfate, Copper Cyanide, Sodium Sulfate, Gold Plating, Lubricants, Lead Acetate, Iron Plating, Potassium Bicarbonate, Potassium Sulfate, Calcium Hydroxide, Sodium Chloride, Calcium Carbonate, Acetic Anhydride, Ferrous Chloride, Aluminum Chloride 20%, Amyl Alcohol, Mercuric Chloride, Calcium Chloride, Indium Sulfamate Plating, Glycerin, Sea Water, Sodium Silicate, Barium Sulfate, Aluminum Sulfate, Nickel Plating, Potassium Chlorate, Mercuric Cyanide, Potassium Carbonate, Borax, Potassium Nitrate, Naphtha, Potassium Bromide, Antimony Plating, Anhydrous, Ferrous Sulfate, Stannic Chloride, Potassium Chloride, Barium Sulfide, Magnesium Nitrate, Copper Sulfate, Copper Chloride, Acetaldehyde, Ammonium Hydroxide, Ammonium Nitrate, Sodium Thiosulphate, Fuel Oil, Alcohol, Zinc Chloride, Ammonium Phosphate, Barium Chloride, Copper Nitrate, Barium Carbonate, Potassium Permanganate, Magnesium Sulfate, Tribasic |
| Min Ambient Temperature | 32 Degrees F |
| Mounting Location | Open Air |
| Freight Class Code | 260 |
| Impeller Material | Barium Ferrite/Polypropylene |
| Suction Port | 5/8 in Hose |
| Full Load Current | 0.94 A |
| Display Sell UOM | EA |
| Best Efficiency Head | 4 ft |
| Cord Type | 3-conductor SJO |
| Manufacturer Part Number | 581030 |
| Motor Enclosure Type | OAO |
| Pump Drive Configuration | Close-Coupled |
| Priming | Manual |
| Manufacturers Warranty Length | 1 yr |
| Safety Data Sheet (SDS) Applicable? | N |
| Fluid Temperature Range | 32 Degrees F to 150 Degrees F |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Case Pressure - Maximum | 3 psi |
| Housing Material | Glass-Filled Polypropylene |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Pump Design | End Suction |
| Frequency | 60 Hz |
| Motor Frame Size | 3.3 |
| Viscosity (Maximum) | 100 SUS |
| Impeller Diameter | 2-81/100 in |
| Max Fluid Temperature | 150 Degrees F |
| Best Efficiency Flow | 4 gpm |
| Port Connections | GHT |
| Includes California Prop 65 Short-Form Warning | Y |
| Mfr. Model # | 581030 |
Description
Magnt Drv Pmp, 5/8in, Hose, 1/50hp, Glss PP