Magnetic Drive Pump: 1 hp HP, Single Phase, 115/208-230V AC, Polypropylene, TEFC
In Stock
$2,064.74
/each
Earn 2064 points for this item
($20.64 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Magnetic Drive Pump: 1 hp HP, Single Phase, 1...
Mfr # DB10P-M218
$2,064.74
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | FINISH THOMPSON |
| Safety Data Sheet (SDS) Applicable? | N |
| Freight Class Code | 260 |
| Number of Stages | 1 |
| Manufacturers Warranty Length | 5 yr |
| Flow @ 24' Head | 85 gpm |
| Flow @ 50' Head | 38 gpm |
| NPSHr | 11 ft |
| Pump Mounting Style | Base-Mounted, Foot-Mounted |
| Horsepower (Maximum) | 1 hp |
| Discharge | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Product Powered by Fossil Fuel | N |
| Housing Material | Polypropylene |
| Motor Efficiency Class | Standard Efficient |
| Flow @ 6' Head | 95 gpm |
| Max Motor Speed | 3,450 RPM |
| Shaft Seal Type | Sealless |
| Bearing Type | Radial, Thrust |
| Gasket Material | FKM |
| Overall Height | 8.3 in |
| Impeller Diameter | 3-3/4 in |
| Best Efficiency Flow | 60 gpm |
| Motor Design | Capacitor-Start/Run |
| Priming | Manual |
| Flow @ 3' Head | 95 gpm |
| Discharge Rotation Increments | 0 Degrees |
| Overall Width | 7.5 in |
| Should Sales be Restricted by Region? | N |
| Min Ambient Temperature | 32 Degrees F |
| Contains California Prop 65 Carcinogen | N |
| Discharge Standard | NPT |
| Fluid Temperature Range | 35 Degrees F to 180 Degrees F |
| NEMA Nominal Efficiency | 70.0 |
| Chemical Compatibility | Acetic Acid 80%, Hydrochloric/Muriatic Acid 20%, Fertilizer, Sulfuric Acid 10% to 70%, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Deionized Water, Potassium Hydroxide 50%, Sodium Bicarbonate 10%, Herbicide, Acetic Acid 20%, Sodium Hydroxide/Caustic Soda 20%, Water, Citric Acid 50%, Calcium Chloride, Hydrochloric/Muriatic Acid 37%, Sodium Hydroxide/Caustic Soda 50%, Hydrochloric/Muriatic Acid 100%, Sulfuric Acid 1% to 10%, Antifreeze, Ammonium Hydroxide, Fungicide, Saltwater, Sodium Hydroxide/Caustic Soda 80%, Phosphoric Acid 50% |
| Display Sell UOM | EA |
| Discharge Gender | Male |
| Is this a Hazardous Material Product? | N |
| Motor Efficiency Regulation Applicable | Y |
| Case Pressure - Maximum | 80 psi |
| Max Fluid Temperature | 180 Degrees F |
| Mounting Orientation | Horizontal |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Pump Drive Configuration | Close-Coupled |
| Pump Design | End Suction |
| Ozone Depleting Substance | N |
| Mounting Location | Open Air |
| Max Ambient Temperature | 180 Degrees F |
| Suction Port | 1-1/2 in NPT |
| Overall Length | 17.3 in |
| Nameplate Voltage | 115/208-230V AC |
| Shut Off Pressure - Maximum | 21.6 psi |
| Discharge Diameter | 1-1/2 in |
| Motor Frame Size | 56C |
| Inlet Gender | Female |
| Inlet | 1-1/2 in FNPT |
| Inlet Diameter | 1-1/2 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Port Connections | NPT |
| Flow @ 18' Head | 94 gpm |
| Drive Coupling Type | Magnetic Coupling |
| Inlet Type | FNPT |
| Contains California Prop 65 Reproductive Toxicant | N |
| Impeller Material | Polypropylene |
| Phase | Single |
| Viscosity (Maximum) | 150 cps |
| Pumping Application | Chemical Transfer, Liquid Transfer |
| Full Load Current | 10.1/5.64-5.06A |
| Flow @ 40' Head | 66 gpm |
| Max Specific Gravity | 1.8 |
| Flow @ 15' Head | 95 gpm |
| Display Qty | 1 |
| Best Efficiency Head | 44 ft |
| Flow Rate (Maximum) | 94 gpm |
| Min Fluid Temperature | 35 Degrees F |
| Feet of Head (Maximum) | 50 ft |
| Hazardous Location Class | Not Rated |
| Manufacturer Part Number | DB10P-M218 |
| Storage Protection Code | A |
| Inlet Standard | NPT |
| Flow @ 9' Head | 95 gpm |
| Motor Enclosure Type | TEFC |
| Mfr. Model # | DB10P-M218 |
Description
Magnetic Drive Pump, 1-1/2in, MNPT, 1hp, PP