Magnetic Drive Pump: 1 1/2 hp HP, Three Phase, 208-230/460V AC, PVDF, 1 1/2 in FNPT
In Stock
$2,455.00
Save 19%
$1,999.93
/each
Earn 1999 points for this item
($19.99 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Magnetic Drive Pump: 1 1/2 hp HP, Three Phase...
Mfr # DB10V-T-M207
$1,999.93
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | FINISH THOMPSON |
| Max Specific Gravity | 1.8 |
| Ozone Depleting Substance | N |
| Flow @ 50' Head | 38 gpm |
| Fluid Temperature Range | 35 Degrees F to 220 Degrees F |
| Should Sales be Restricted by Region? | N |
| Motor Enclosure Type | TEFC |
| Inlet Diameter | 1-1/2 in |
| Min Fluid Temperature | 35 Degrees F |
| Pumping Application | Chemical Transfer, Liquid Transfer |
| Discharge Diameter | 1-1/2 in |
| Motor Efficiency Compliance Certification Number | CC029A |
| Product Powered by Fossil Fuel | N |
| Display Sell UOM | EA |
| Best Efficiency Flow | 60 gpm |
| Pump Drive Configuration | Close-Coupled |
| Motor Design | Three-Phase |
| Manufacturers Warranty Length | 5 yr |
| Motor Frame Size | 56C |
| Flow @ 15' Head | 95 gpm |
| Flow @ 40' Head | 66 gpm |
| Priming | Manual |
| Bearing Type | Radial, Thrust |
| Flow @ 6' Head | 95 gpm |
| Max Motor Speed | 3,450 RPM |
| Overall Length | 17.3 in |
| Flow @ 24' Head | 85 gpm |
| Discharge Gender | Male |
| Overall Width | 7.5 in |
| Drive Coupling Type | Magnetic Coupling |
| Discharge Standard | NPT |
| Hazardous Location Class | Class I Division 2 |
| Contains California Prop 65 Reproductive Toxicant | N |
| Impeller Material | PVDF |
| Shaft Seal Type | Sealless |
| Nameplate Voltage | 208-230/460V AC |
| Phase | Three |
| Safety Data Sheet (SDS) Applicable? | N |
| Chemical Compatibility | Acetic Acid 80%, Nitric Acid, Fertilizer, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Sodium Hypochlorite 12.5%, Deionized Water, Sodium Bicarbonate 10%, Herbicide, Acetic Acid 20%, Hydrogen Peroxide up to 50%, Water, Citric Acid 50%, Calcium Chloride, Sulfuric Acid 1% to 98%, Chromic Acid 10%, Antifreeze, Ammonium Hydroxide, Saltwater, Fungicide, Phosphoric Acid 50%, Transmission Fluid |
| Freight Class Code | 260 |
| Inlet Gender | Female |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Inlet | 1-1/2 in FNPT |
| Gasket Material | FKM |
| Housing Material | PVDF |
| NEMA Nominal Efficiency | 84.0 |
| Shut Off Pressure - Maximum | 21.6 psi |
| Number of Stages | 1 |
| Impeller Diameter | 3-3/4 in |
| Viscosity (Maximum) | 150 cps |
| Port Connections | NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Suction Port | 1-1/2 in NPT |
| Flow Rate (Maximum) | 94 gpm |
| Best Efficiency Head | 44 ft |
| Flow @ 9' Head | 95 gpm |
| Motor Efficiency Regulation Applicable | Y |
| Max Ambient Temperature | 220 Degrees F |
| Contains California Prop 65 Carcinogen | N |
| Pump Mounting Style | Base-Mounted, Foot-Mounted |
| Discharge Rotation Increments | 0 Degrees |
| Case Pressure - Maximum | 80 psi |
| Storage Protection Code | A |
| Discharge | 1-1/2 in NPT |
| Min Ambient Temperature | -20 Degrees F |
| Is this a Hazardous Material Product? | N |
| Mounting Orientation | Horizontal |
| Motor Efficiency Class | NEMA Premium Efficient |
| Overall Height | 8.3 in |
| Max Fluid Temperature | 220 Degrees F |
| Full Load Current | 4.2-3.74/1.87A |
| Inlet Type | FNPT |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Display Qty | 1 |
| Feet of Head (Maximum) | 50 ft |
| Mounting Location | Open Air |
| NPSHr | 11 ft |
| Inlet Standard | NPT |
| Pump Design | End Suction |
| Manufacturer Part Number | DB10V-T-M207 |
| Flow @ 3' Head | 95 gpm |
| Flow @ 18' Head | 94 gpm |
| Horsepower (Maximum) | 1-1/2 hp |
| Mfr. Model # | DB10V-T-M207 |
Description
Magnt Drv Pmp, 1-1/2in, MNPT, 1-1/2hp, PVDF