3M™ SR Cutter No.3 3/8" Dia. x 1" Thick

Description

The 3M™ sr cutter is a plastic rotary cutting tool with an attached 1/4"-28 male threaded metal mandrel for use on slow speed right angle drills. Our sr cutter works quickly and efficiently to peel off sealants or other thick coatings with minimal to no abrasion to the underlying base material replacing tedious scraping by hand and messy chemical solvents.

A great alternative to tedious hand scraping-the 3M™ sr cutter is designed to save time and increase productivity for cleaning operations typical in the aerospace industry. Two different sizes are available to enable effective coating removal-no. 3 for flat surfaces and no.

8 for cleaning on and around rivets or other fasteners. The cylindrical blades work both horizontally and vertically against the workpiece to cut through sealants such as polysulfide polythioether polyurethane rtv sealants and silicones. The plastic blades work effectively without the operator having to pause and resharpen them.

The sr cutter works fast and helps eliminate follow-up work for repainting or repairing damaged coatings.

Cleanly replaces chemical solvents-not only is the 3M™ sr cutter a great alternative to hand scraping but it works without the use of messy chemical solvents. It enables operators to remove sealants and residues immediately without having to wait for chemicals to act or spending time and effort handling and cleaning up a hazardous mess. Your only waste is the sealant itself.

Using the 3M™ sr cutter-no. 3 cutter for fillet seals and flat applications place the no. 3 sr cutter at head of sealant bead so that the side of cutter contacts the sealant.

Apply firm pressure downward onto the sealant and use low rotational speed (throttle down on drill) to remove sealant from one spot without moving the drill back and forth. When the substrate is exposed increase the rotational speed of the drill and move the tool along the strip of sealant making sure that the cutter blades adjacent to the substrate