Sprinkler Pump: 1 1/2 hp, Single Phase, 115/230V AC, Cast Iron, 2 in NPT, 1 1/2 in NPT, ODP, 66 gpm
In Stock
$1,500.00
Save 3%
$1,448.12
/each
Earn 1448 points for this item
($14.48 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FLINT & WALLING Sprinkler Pump: 1 1/2 hp, Single Phase, 115/2...
Mfr # SP15P1
$1,448.12
Customers Also Viewed
No related products found.
Product Details
| Brand | FLINT & WALLING |
| Duty Cycle | Continuous |
| Horsepower | 1-1/2 hp |
| Motor Frame Size | 56J |
| Contains California Prop 65 Reproductive Toxicant | N |
| Motor Enclosure Type | ODP |
| Min Fluid Temperature | 33 Degrees F |
| Nameplate Voltage | 115/230V AC |
| Flow @ 10 psi | 72 gpm |
| Standards | CSA |
| Flow @ 40 psi | 44 gpm |
| Ozone Depleting Substance | N |
| Series | SP |
| Flow @ 20 psi | 65 gpm |
| Fluid Temperature Range | 33 Degrees F to 140 Degrees F |
| Discharge Gender | Female |
| Motor Enclosure | Open Drip Proof |
| Contains California Prop 65 Carcinogen | N |
| Impeller Material | Thermoplastic |
| Inlet Gender | Female |
| Full Load Current | 21/10.5 |
| Best Efficiency Head | 46 ft |
| Freight Class Code | 39 |
| Case Pressure - Maximum | 100 psi |
| Nameplate Voltage Broad | 115/230V AC |
| Inlet Type | NPT |
| Best Efficiency Flow | 66 gpm |
| Display Qty | 1 |
| Frequency | 60 Hz |
| Flow @ 15 psi | 68 gpm |
| Flow @ 30 psi | 57 gpm |
| Flow @ 5 psi | 75 gpm |
| Phase | Single |
| Wetted Material | Cast Iron, Thermoplastic |
| Min Ambient Temperature | 33 Degrees F |
| Safety Data Sheet (SDS) Applicable? | N |
| Manufacturers Warranty Length | 1 yr |
| Flow Rate (Maximum) | 67 gpm |
| Feet of Head (Maximum) | 113 ft |
| Shaft Seal Material | Carbon/Silicon Carbide |
| Shut Off Pressure - Maximum | 100 psi |
| Product Powered by Fossil Fuel | N |
| Priming | Self-Priming |
| Electrical Connection Type | Plug-In |
| Discharge | 1-1/2 in NPT |
| Pump Housing Material | Cast Iron |
| Thermal Overload Protection | Yes |
| Suction Lift (Maximum) | 25 ft |
| Inlet | 2 in NPT |
| Max Fluid Temperature | 140 Degrees F |
| RPM (Maximum) | 3,450 RPM |
| For Use With Potable Systems | Yes |
| Manufacturer Part Number | SP15P1 |
| Display Sell UOM | EA |
| Storage Protection Code | A |
| Should Sales be Restricted by Region? | N |
| Chemical Compatibility | Water |
| Discharge Standard | NPT |
| Number of Stages | 1 |
| Port Connections | NPT |
| Pumping Application | Drip Irrigation, Water Transfer, Booster Service, Livestock Watering, Irrigation, Sprinkler Systems |
| Features | Sealed Ball Bearings for Continuous Operation |
| Pump Design | End Suction |
| Inlet Diameter | 2 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Shaft Material | Stainless Steel |
| Discharge Diameter | 1-1/2 in |
| Inlet Standard | NPT |
| Discharge Type | NPT |
| Pump Drive Configuration | Close-Coupled |
| Is this a Hazardous Material Product? | N |
| Mfr. Model # | SP15P1 |
Description
SprinkPmp, 1.5hp, 1.5", CI, Carbon/SiCarbid