Constant Pressure Booster Pump: 1 hp, Single Phase, 115V AC, 35 psi Pressure Boost (Max)
In Stock
$964.50
Save 12%
$844.41
/each
Earn 844 points for this item
($8.44 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Constant Pressure Booster Pump: 1 hp, Single...
Mfr # 4HFA8
$844.41
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2533 |
| Brand | DAYTON |
| Pump Casing Material | Stainless Steel |
| Is this a Hazardous Material Product? | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Compatible Discharge Pipe Size | 1 in |
| Cord Length | 5.5 in |
| Power Source | Corded Electric |
| Includes | Pump Controller |
| Display Sell UOM | EA |
| Case Pressure - Maximum | 75 psi |
| Pressure Switch Setting - Maximum | 45 psi |
| Discharge | 1 in FNPT |
| Impeller Material | Thermoplastic |
| Contains California Prop 65 Carcinogen | N |
| For Media Type | Clear Water |
| Motor Ambient Temperature (Minimum) | 5 Degrees C |
| Pressure Boost - Maximum | 35 psi |
| Feet of Head - Maximum | 102 ft |
| Compatible Intake Pipe Size | 1 in |
| Low Lead Compliance Level | NC |
| Duty Cycle | Continuous |
| Number of Stages | 2 |
| Storage Protection Code | A |
| Shut Off Pressure - Maximum | 45 psi |
| Inlet Diameter | 1 in |
| For Water System Type | Non-Potable Water |
| Discharge Gender | Female |
| Inlet Type | FNPT |
| Inlet | 1 in FNPT |
| Phase | Single |
| Restricted Sale Code | A9 |
| Media Temperature - Maximum | 95 Degrees F |
| Nameplate Voltage | 115V AC |
| Includes Controller | Yes |
| Frequency | 60 Hz |
| Manufacturer Part Number | 4HFA8 |
| Inlet Standard | NPT |
| Media Temp. Range | 95 Degrees F |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| For Use With Potable Systems | No |
| Product Powered by Fossil Fuel | N |
| Should Sales be Restricted by Region? | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Motor Design | Capacitor-Start |
| Installation | Floor Standing |
| Overall Length | 11.88 in |
| Standards | CSA Certified, CUS Certified |
| Discharge Standard | NPT |
| Display Qty | 1 |
| Full Load Current | 7.7 A |
| Pump Technology | Centrifugal |
| Overall Width | 8.84 in |
| Application | Transfer |
| Suction Lift - Maximum | 25 ft |
| Pressure Switch Setting - Minimum | 14.5 psi |
| Electrical Connection Type | Plug-In |
| Flow Rate - Maximum | 18.5 gpm |
| Solids Diameter - Maximum | 1 in |
| Discharge Type | FNPT |
| Nominal Voltage | 120V AC |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Impeller Design | Closed |
| Motor Enclosure | TEFC |
| Seal Material | Buna-N |
| Priming | Manual |
| Series | HAS |
| Thermal Protection | Auto |
| Inlet Gender | Female |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Discharge Diameter | 1 in |
| LowLead_WarningMessage | Compliance_LowLead_NotLowLead |
| Manufacturer Warranty Length | 1 yr |
| Mounting Orientation | Horizontal |
| Horsepower | 1 hp |
| Freight Class Code | 39 |
| Overall Height | 13.59 in |
| Contains California Prop 65 Reproductive Toxicant | N |
| Flow Rate - Minimum | 5.3 gpm |
| Ozone Depleting Substance | N |
| Pressure Boost - Minimum | 25 psi |
| Mfr. Model # | 4HFA8 |
Description
Constant Pressure Booster Pump, 1 hp