Centrifugal Pump: Plastic, 1/10 hp HP, 115V AC, 19.2 gpm Max Flow, 20 ft Max Head
In Stock
$738.79
/each
Earn 738 points for this item
($7.38 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Centrifugal Pump: Plastic, 1/10 hp HP, 115V A...
Mfr # 517200006
$738.79
Customers Also Viewed
No related products found.
Product Details
| Brand | LITTLE GIANT |
| Inlet Gender | Male |
| Horsepower | 1/10 hp |
| Shaft Material | 316 Stainless Steel |
| Best Efficiency Flow | 890 gph |
| Cord Length | 6 ft |
| Flow @ 1' Head | 868 gph |
| Standards | CSA Certified |
| Discharge Orientation | Top |
| Electrical Connection Type | Plug-In |
| Duty Cycle | Continuous |
| Discharge Rotation Increments | 0 Degrees |
| Max Solids Size | 0 in |
| Flow Rate @ 10 ft of Head - Maximum | 14.8 gpm |
| Product Powered by Fossil Fuel | N |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Motor Enclosure | Totally Enclosed Non-Ventilated |
| Best Efficiency Head | 10 ft |
| Min Flow | 0 gph |
| Shaft Seal Material | FKM |
| Thermal Overload Protection | Yes |
| EnvironmentallyPreferable_Indicator | N |
| Pump Housing Material | Plastic |
| Media Temperature - Maximum | 180 Degrees F |
| Manufacturers Warranty Length | 2 yr |
| Flow Rate @ 5 ft of Head (Maximum) | 17.8 gpm |
| Includes California Prop 65 Short-Form Warning | Y |
| Flow Rate (Maximum) | 19.2 gpm |
| Discharge Diameter | 1/2 in |
| Priming | Manual |
| Shut Off Pressure - Maximum | 8.7 psi |
| Discharge Standard | NPT |
| Phase | Single |
| Should Sales be Restricted by Region? | N |
| Volute Material | Nylon |
| Flow Rate @ 15 ft of Head (Maximum) | 4 gpm |
| Includes | Mounting Bracket |
| Overall Width | 4.5 in |
| Mounting Orientation | Horizontal |
| Chemical Compatibility | Water, Saltwater |
| Impeller Material | Nylon |
| Feet of Head (Maximum) | 20 ft |
| Display Qty | 1 |
| For Shaft Outside Diameter | 3/10 in |
| Media Temperature - Minimum | 33 Degrees F |
| Suction Lift - Maximum | 25 ft |
| Manufacturer Part Number | 517200006 |
| Max Viscosity | 37 SUS |
| Full Load Current | 1.0 A |
| Drive Coupling Type | No Coupling |
| Max Case Pressure | 40 psi |
| Flow @ 20' Head | 0 gpm |
| Intake and Discharge Size | 3/4 in , 1/2 in |
| NPSHr | 1 ft |
| Impeller Design | Semi-Open |
| Display Sell UOM | EA |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet Standard | NPT |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Impeller Diameter | 2-1/2 in |
| Discharge Position | Offset |
| Number of Stages | 1 |
| Freight Class Code | 39 |
| Motor Design | Permanent Split Capacitor |
| Nameplate Voltage | 115V AC |
| Series | S |
| Ozone Depleting Substance | N |
| Storage Protection Code | A |
| Overall Length | 6.2 in |
| Contains California Prop 65 Carcinogen | Y |
| Discharge Gender | Male |
| Min Head | 0 ft |
| Pumping Application | Cooling and Heat Transfer, Water Circulation, Coolant Recirculating |
| Overall Height | 4.5 in |
| Is this a Hazardous Material Product? | N |
| Inlet Position | Center |
| Hazardous Location Class | Not Rated |
| Inlet Diameter | 3/4 in |
| Shaft Seal Type | Lip |
| Max Motor Speed | 3,450 RPM |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Mfr. Model # | 517200006 |
Description
CentrifugalPump, 1/10 hp, Plastic, 1/2", FKM