Electric Drum Pump: Pump with Hose, 1/3 hp HP, 115 V AC, 17 gpm, Polypropylene/PVDF
In Stock
$758.50
Save 12%
$663.90
/each
Earn 663 points for this item
($6.63 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Electric Drum Pump: Pump with Hose, 1/3 hp HP...
Mfr # EFV-40 & S1 Kit
$663.90
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2555 |
| Brand | FINISH THOMPSON |
| For Container Size | 55 gal |
| Minimum Fluid Temperature | 0 Degrees F |
| Pump Technology | Centrifugal |
| Spout Material | PVDF |
| Includes Bung Adapter | No |
| Hose Inside Diameter | 3/4 in |
| Power Source | Corded Electric |
| Discharge Connection Type | Hose Barb |
| Discharge Tube Outlet OD | 1 in |
| Wetted Material | 316 Stainless Steel/FKM/Polypropylene/PTFE/PVDF |
| Suction Tube OD | 1-1/4 in |
| Includes Suction Tube | Yes |
| Maximum Outlet Pressure | 8.7 psi |
| Contains California Prop 65 Carcinogen | N |
| Suction Tube | 40 in PVDF |
| Maximum Flow Rate | 17 gpm |
| Variable Speed | No |
| Includes Spout | Yes |
| Adapter Connection Diameter | 2 in |
| Bung Adapter Included | Not Included |
| Self-Priming | Yes |
| Frequency | 60 Hz |
| Motor Speed | 14,000 RPM |
| Safety Data Sheet (SDS) Applicable? | N |
| Spout Length | 1 in |
| Manufacturer Part Number | EFV-40 & S1 Kit |
| Not Recommended Chemicals | Paint Thinner, Concentrated Nitric Acid, DEF, Naphtha, Synthetic Oil, Sodium Hydroxide 50%, E85, Anhydrous Ammonia, Sodium Hydroxide 20%, Lacquer Thinners, Acetone, Hydrazine, Methyl Ethyl Ketone, Formaldehyde, Methanol, Potassium Hydroxide 50%, Ammonia Liquid, Windshield Washer Fluid, Petroleum Oil, Ethanol, Formaldehyde 40%, Diesel Fuel, Turpentine, Glycerin, Hydrofluoric Acid 75%, Ethyl Acetate, Toluene, Heptane, Brake Fluid, Hexane, Stoddard Solvent, Sodium Hydroxide 80%, Gasoline, Hydrofluoric Acid 20%, Hydrofluoric Acid 100%, Kerosene, Glacial Acetic Acid, Isopropanol, Biodiesel, Xylene, Cyclohexane, Sulfuric Acid 75% to 100% |
| Freight Class Code | 39 |
| Noise Level | 74 dB |
| Adapter Material | Polypropylene |
| Chemical Compatibility | Nitric Acid 10% Solution, Automatic Transmission Fluid, Acetic Acid 80%, Herbicides, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Deionized Water, Sodium Bicarbonate 10%, Hydrochloric Acid 20%, Chromic Acid 30%, Trichlorethylene 50%, Hydrochloric Acid 100%, Fertilizers, Acetic Acid 20%, Chromic Acid 5%, Bleach, Calcium Chloride, Citric Acid 50%, Sulfuric Acid 10% to 75%, Salt Water, Phosphoric Acid 40% Solution, Formic Acid, Antifreeze Coolant, Sulfuric Acid up to 10%, Fresh Water, Fungicides, Chromic Acid 10%, Chromic Acid 50%, Nitric Acid 20% Solution, Ammonium Hydroxide, Nitric Acid 50% Solution, Hydrochloric Acid 37% |
| Housing Material | Polypropylene/PVDF |
| Storage Protection Code | A |
| Bung Adapter | 2 in Not Included |
| For Container | 55 Gal Drum |
| Maximum Viscosity | 300 cps |
| Height Above Container | 8-5/8 in |
| Plug Type | NEMA 5-15 |
| Suction Tube ID | 1-1/4 in |
| Contains California Prop 65 Reproductive Toxicant | N |
| Discharge Tube Outlet ID | 3/4 in |
| Included Container | No Container Included |
| Pump Connection ID | 1-5/16 in |
| Duty Cycle | Continuous |
| For Container Type | Drum |
| Hose | 3/4 in x 5 ft |
| Suction Tube Length | 40 in |
| Suction Tube Material | PVDF |
| Overall Length | 49 in |
| Seal Material | Fluoroelastomer |
| Nozzle | Not Included |
| Hose Cover Material | PVC |
| Standards | QPS |
| Runs Dry | No |
| Product Powered by Fossil Fuel | N |
| Includes Follower Plate | No Follower Plate Included |
| Includes Nozzle | No |
| Mount Type | Bung |
| Should Sales be Restricted by Region? | N |
| Spout Connection Type | Hose Barb |
| Nominal Voltage | 120V AC |
| Hose Tube Material | PVC |
| Spout Discharge Size | 3/4 in |
| Motor Enclosure Design | Open Drip Proof |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Display Sell UOM | EA |
| Thermal Protection | No |
| Full Load Current | 2 A |
| Pump Connection Type | Smooth Bore |
| Hose Length | 5 ft |
| Maximum Head | 20 ft |
| Cord Length | 12 ft |
| Maximum Fluid Temperature | 160 Degrees F |
| Maximum Head Pressure | 8 psi |
| Static Protection | Not Groundable |
| Pump Package Type | Pump with Hose |
| Hose Outside Diameter | 1 in |
| Includes | Hose, Motor, Clamp |
| Includes Discharge Hose | Yes |
| Display Qty | 1 |
| Nozzle Included | Not Included |
| Phase | Single |
| Pump Connection OD | 1-5/16 in |
| Rated Voltage | 115 V AC |
| Ozone Depleting Substance | N |
| Motor Horsepower | 1/3 hp |
| Hazardous Location Class | Not Rated |
| Meter Type Included | No Meter Included |
| Container Cover Type Included | No Cover Included |
| Is this a Hazardous Material Product? | N |
| Mfr. Model # | EFV-40 & S1 Kit |
Description
ElectricDrumPump, PP/PVDF, 115VAC