Centrifugal Pump: 1 hp, Single Phase, 115/230V AC, Stainless Steel, 1 1/2 in Inlet Dia., Barbed
In Stock
$886.10
/each
Earn 886 points for this item
($8.86 for your next purchase!)
REGISTER NOW TO EARN!
ETA 30-60 DAYS
Request quantity discount pricing
You're Viewing
AMERICAN STAINLESS PUMPS Centrifugal Pump: 1 hp, Single Phase, 115/230...
Mfr # FDP1AH
$886.10
Customers Also Viewed
No related products found.
Product Details
| Brand | AMERICAN STAINLESS PUMPS |
| Cord Length | 1 ft |
| Discharge Diameter | 1-1/2 in |
| Inlet Standard | Barbed |
| Volute Material | 304 Stainless Steel |
| Motor Frame Size | 56J |
| Phase | Single |
| NEMA Nominal Efficiency | 74.1 |
| Product Powered by Fossil Fuel | N |
| Mounting Orientation | Horizontal |
| Contains California Prop 65 Reproductive Toxicant | N |
| Frequency | 60 Hz |
| Port Connections | Barbed |
| California Biodegradable Labeling Compliance | Y |
| Chemical Compatibility | Lactic Acid, Gasoline, Water-Glycol, Boric Acid 10%, Sodium Hydroxide 50%, Benzoic Acid, Sodium Hydroxide 10%, Kerosene, Diethylene Glycol, Potassium Hydroxide 50%, Glycerol, Water, Citric Acid, Detergents, Diesel, Hydraulic Fluid, Antifreeze, Potassium Permanganate 20%, Propylene Glycol, Sodium Hydroxide 20%, Ammonium Hydroxide, Motor Oil, Saltwater, Potassium Hydroxide |
| Display Qty | 1 |
| Freight Class Code | 39 |
| Intake and Discharge Size | 1-1/2 in , 1-1/2 in |
| NPSHr | 23.1 ft |
| Wetted Material | Stainless Steel |
| Is this a Hazardous Material Product? | N |
| Flow @ 50' Head | 35 gpm |
| Pump Design | End Suction |
| Shaft Seal Material | Carbon/Ceramic, Buna-N |
| Safety Data Sheet (SDS) Applicable? | N |
| Best Efficiency Head | 62 ft |
| Discharge Rotation Increments | 90 Degrees |
| Electrical Connection Type | Plug-In |
| Fluid Temperature Range | -40 Degrees F to 225 Degrees F |
| Discharge Orientation | Top |
| Solid Diameter (Maximum) | 0.27 in |
| Impeller Material | Stainless Steel |
| Drive Coupling Type | No Coupling |
| Thermal Overload Protection | No |
| Display Sell UOM | EA |
| Flow Rate (Maximum) | 53 gpm |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Motor Efficiency Compliance Certification Number | CC312B |
| Duty Cycle | Continuous |
| Full Load Current | 9.6/4.8 |
| Storage Protection Code | A |
| Suction Lift - Maximum | 24 ft |
| Inlet Position | Offset |
| Horsepower | 1 hp |
| Overall Width | 6.7 in |
| Motor Efficiency Regulation Applicable | N |
| Manufacturer Part Number | FDP1AH |
| Best Efficiency Flow | 37 gpm |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Max Ambient Temperature | 104 Degrees F |
| Min Fluid Temperature | -40 Degrees F |
| Series | FDP |
| Number of Stages | 1 |
| Contains California Prop 65 Carcinogen | N |
| Shut Off Pressure - Maximum | 50 psia |
| Motor Efficiency Class | Standard Efficient |
| Max Specific Gravity | 1 |
| Overall Height | 7.6 in |
| Priming | Manual |
| Shaft Material | 300 Stainless Steel |
| Discharge Position | Offset |
| Inlet Gender | Male |
| Feet of Head (Maximum) | 65 ft |
| Inlet Orientation | Top |
| Max Fluid Temperature | 225 Degrees F |
| Impeller Diameter | 4-3/8 in |
| Discharge Location | Top Offset |
| Motor Design | Capacitor-Start |
| Nameplate Voltage | 115/230V AC |
| For Use With Potable Systems | Yes |
| Overall Length | 10.8 in |
| Should Sales be Restricted by Region? | N |
| Standards | CSA Certified, UL Listed |
| Impeller Design | Semi-Open |
| Discharge Standard | Barbed |
| Flow @ 40' Head | 53 gpm |
| Pumping Application | Condensate Return, Spraying Systems, Cooling and Heat Transfer, Booster Services, Jockey Pump Services, Evaporative Cooling, Water Circulation, Boiler Feed, Liquid Transfer, Reverse Osmosis and Water Treatment, Filtration, Coolant Recirculating, Condensate Removal |
| Pump Housing Material | Stainless Steel |
| Ozone Depleting Substance | N |
| Discharge Gender | Male |
| Flow @ 60' Head | 14 gpm |
| For Shaft Outside Diameter | 5/8 in |
| Shaft Seal Type | Mechanical |
| Motor Enclosure Type | TEFC |
| Inlet Diameter | 1-1/2 in |
| Case Pressure - Maximum | 50 psia |
| Nominal Voltage | 115/230V AC |
| Max Motor Speed | 3,420 RPM |
| Mfr. Model # | FDP1AH |
Description
CentrfPmp, 1 hp, SS, 1-1/2"