Centrifugal Pump: 1 hp, Single Phase, 115/230V AC, Stainless Steel, 1 1/2 in Inlet Dia., Barbed
In Stock
$941.51
/each
Earn 941 points for this item
($9.41 for your next purchase!)
REGISTER NOW TO EARN!
ETA 30-60 DAYS
Request quantity discount pricing
You're Viewing
AMERICAN STAINLESS PUMPS Centrifugal Pump: 1 hp, Single Phase, 115/230...
Mfr # FDP2AH
$941.51
Customers Also Viewed
No related products found.
Product Details
| Brand | AMERICAN STAINLESS PUMPS |
| Shut Off Pressure - Maximum | 50 psia |
| Flow @ 50' Head | 35 gpm |
| Standards | UL Listed |
| Thermal Overload Protection | No |
| Inlet Orientation | Top |
| Volute Material | 304 Stainless Steel |
| Discharge Gender | Male |
| Series | FDP |
| Flow @ 40' Head | 53 gpm |
| Freight Class Code | 39 |
| Motor Design | Capacitor-Start |
| Number of Stages | 1 |
| Intake and Discharge Size | 1-1/2 in , 1-1/2 in |
| Motor Frame Size | 56J |
| Max Fluid Temperature | 225 Degrees F |
| Flow @ 60' Head | 14 gpm |
| Feet of Head (Maximum) | 65 ft |
| Is this a Hazardous Material Product? | N |
| Overall Width | 6.7 in |
| Chemical Compatibility | Lactic Acid, Gasoline, Water-Glycol, Boric Acid 10%, Sodium Hydroxide 50%, Benzoic Acid, Sodium Hydroxide 10%, Kerosene, Diethylene Glycol, Potassium Hydroxide 50%, Glycerol, Water, Citric Acid, Detergents, Diesel, Hydraulic Fluid, Antifreeze, Potassium Permanganate 20%, Propylene Glycol, Sodium Hydroxide 20%, Ammonium Hydroxide, Motor Oil, Saltwater, Potassium Hydroxide |
| Discharge Position | Offset |
| Display Qty | 1 |
| Port Connections | Barbed |
| California Biodegradable Labeling Compliance | Y |
| Contains California Prop 65 Carcinogen | N |
| Pump Housing Material | Stainless Steel |
| Display Sell UOM | EA |
| Cord Length | 1 ft |
| Motor Efficiency Class | Standard Efficient |
| NPSHr | 23.1 ft |
| Max Specific Gravity | 1 |
| Min Fluid Temperature | -40 Degrees F |
| Shaft Seal Type | Mechanical |
| Max Ambient Temperature | 104 Degrees F |
| Best Efficiency Flow | 37 gpm |
| Motor Efficiency Compliance Certification Number | CC312B |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Contains California Prop 65 Reproductive Toxicant | N |
| Discharge Orientation | Top |
| Mounting Orientation | Horizontal |
| Flow Rate (Maximum) | 53 gpm |
| Nameplate Voltage | 115/230V AC |
| Electrical Connection Type | Plug-In |
| Case Pressure - Maximum | 50 psia |
| Safety Data Sheet (SDS) Applicable? | N |
| Ozone Depleting Substance | N |
| NEMA Nominal Efficiency | 74.1 |
| Product Powered by Fossil Fuel | N |
| Shaft Seal Material | Carbon/Ceramic, Buna-N |
| Inlet Standard | Barbed |
| Nominal Voltage | 115/230V AC |
| Shaft Material | 300 Stainless Steel |
| For Use With Potable Systems | Yes |
| Inlet Position | Offset |
| Storage Protection Code | A |
| Horsepower | 1 hp |
| Pumping Application | Condensate Return, Spraying Systems, Cooling and Heat Transfer, Booster Services, Jockey Pump Services, Evaporative Cooling, Water Circulation, Boiler Feed, Liquid Transfer, Reverse Osmosis and Water Treatment, Filtration, Coolant Recirculating, Condensate Removal |
| Solid Diameter (Maximum) | 0.27 in |
| Wetted Material | Stainless Steel |
| Phase | Single |
| Best Efficiency Head | 62 ft |
| Priming | Manual |
| Discharge Rotation Increments | 90 Degrees |
| Manufacturer Part Number | FDP2AH |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Impeller Design | Semi-Open |
| Discharge Diameter | 1-1/2 in |
| Impeller Material | Stainless Steel |
| Motor Efficiency Regulation Applicable | N |
| Impeller Diameter | 4-3/8 in |
| Fluid Temperature Range | -40 Degrees F to 225 Degrees F |
| Full Load Current | 9.6/4.8 |
| Overall Length | 10 in |
| Drive Coupling Type | No Coupling |
| Suction Lift - Maximum | 24 ft |
| Discharge Location | Top Offset |
| Inlet Gender | Male |
| Discharge Standard | Barbed |
| Pump Design | End Suction |
| Inlet Diameter | 1-1/2 in |
| For Shaft Outside Diameter | 5/8 in |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Overall Height | 9 in |
| Max Motor Speed | 3,420 RPM |
| Should Sales be Restricted by Region? | N |
| Motor Enclosure Type | TEFC |
| Mfr. Model # | FDP2AH |
Description
CentrfPmp, 1 hp, SS, 1-1/2"