Rotary Gear Pump Head: Direct Drive, Cast Iron, 1/2" FNPT, Steel, 304 SS, 1/2 hp Req., Spur
In Stock
$512.00
Save 20%
$407.46
/each
Earn 407 points for this item
($4.07 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Rotary Gear Pump Head: Direct Drive, Cast Iro...
Mfr # 6DHH7
$407.46
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2578 |
| Brand | DAYTON |
| Overall Height | 3 in |
| Discharge Diameter | 1/2 in |
| Discharge Type | FNPT |
| Gear Design | Spur |
| Gear Material | Steel |
| Drive Type | Direct Drive |
| Includes Relief Valve | No Relief Valve Included, No |
| Shaft Material | Stainless Steel, 304 Stainless Steel, 304 SS |
| Freight Class Code | 39 |
| Flow Rate @ 25 psi | 4.5 gpm |
| Inlet Diameter | 1/2 in |
| Is this a Hazardous Material Product? | N |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Safety Data Sheet (SDS) Applicable? | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Shaft Material Stainless Steel Grade | 304 |
| Overall Length | 4.3 in |
| Display Qty | 1 |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Display Sell UOM | EA |
| Inlet Standard | NPT |
| Storage Protection Code | A |
| Seal Type | Lip |
| Discharge Gender | Female |
| Discharge | 1/2 in FNPT |
| Ozone Depleting Substance | N |
| Suction Lift - Maximum | 6.2 ft |
| Operating Temperature - Minimum | 40 Degrees F |
| Flow Rate @ 20 psi | 4.6 gpm |
| O-Ring Material | Viton |
| Includes California Prop 65 Short-Form Warning | Y |
| Manufacturer Part Number | 6DHH7 |
| Operating Temp. Range | 40 Degrees F to 375 Degrees F |
| Chemical Compatibility | Cooking Oils |
| Contains California Prop 65 Carcinogen | Y |
| Flow Rate @ 40 psi | 4.4 gpm |
| Required Horsepower | 1/2 hp |
| Discharge Standard | NPT |
| Product Powered by Fossil Fuel | N |
| Seal Material | FKM |
| Should Sales be Restricted by Region? | N |
| Inlet Type | FNPT |
| Viscosity - Maximum | 100 SUS |
| Inlet | 1/2 in FNPT |
| Operating Temperature - Maximum | 375 Degrees F |
| Ports | 1/2" FNPT |
| Shaft Outer Diameter | 1/2 in |
| Overall Width | 3 in |
| Body Material | Cast Iron |
| Operating Pressure - Maximum | 40 psi |
| Inlet Gender | Female |
| Mfr. Model # | 6DHH7 |
Description
RotaryGearPmpHead, CI, 1/2"InletDia, 40psi