Milton (S-443) 3-in-1 Tire Valve Extractor and Inflator Tool - Remove Inflate Install

Description

Milton (S-443) 3-IN-1 tire valve extractor and inflator tool - remove inflate install

Work smarter not harder.

This is not

Just another standard valve extractor tool. Milton's S-443 three-in-one tire valve extractor and inflator also acts as an inflation tool that saves you valuable time. There are seals inside the unit along with a smooth bore so the tool can hold air. If there's a

Large amount of air needed to put into a tire you want the valve core out of the way to speed the flow of air through the tire valve. This versatile and inclusive pneumatic valve accessory allows for removing valve cores inflating tires and installing cores all with one tool. Valve core remains inside the tool

Meaning no more lost valve cores or air escaping. Simply clip this convenient tool clips onto tire valve thread.

With the 443

Remove your fill chuck from the tire valve

Install 443

Install air chuck onto 443

Grip knurled end push inward

And unscrew valve core

Once unscrewed pull knurled knob back

(the valve core is now safely held inside of the 443 out of the path of the air but in the airtight chamber.)

Inflate to the proper pressure

Grip knurled end push inward

Tighten valve core

Remove tire chuck

Remove 443

Install valve cap

Without the 443

Remove your fill chuck from the tire valve

Place valve core tool on valve core

Unscrew valve core from valve

Put valve core tool and

The valve core down somewhere (possibly in dirt which gets dirt on the seal)

While you do this air is escaping from the tire

Put your air chuck on the valve and inflate the tire

Stop filling somewhat near your target tire pressure

Remove the air chuck

Locate your valve core and tool from the dirty surface where you put it down on

Wipe off the dirt

Fight the rush of air coming out of the tire valve to get the valve core in

The a