Rotary Gear Pump Head: 316 Stainless Steel, 3/4" Flange, 316 SS, 316 SS, Close Coupled
In Stock
$20,160.00
Save 12%
$17,651.30
/each
Earn 17651 points for this item
($176.51 for your next purchase!)
REGISTER NOW TO EARN!
ETA 2 WEEKS
Request quantity discount pricing
You're Viewing
PULSAFEEDER Rotary Gear Pump Head: 316 Stainless Steel, 3...
Mfr # GC6-UAE-ELU
$17,651.30
Customers Also Viewed
No related products found.
Product Details
| Brand | PULSAFEEDER |
| Seal Material | Carbon/TFE |
| Inlet Type | Flange |
| Discharge | 3/4 in Flange |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Body Material | 316 Stainless Steel |
| Inlet Standard | Flange |
| Flow Rate @ 60 psi | 9.1 gpm |
| Is this a Hazardous Material Product? | N |
| Operating Temperature - Maximum | 450 Degrees F |
| Includes Relief Valve | No, No Relief Valve Included |
| California Biodegradable Labeling Compliance | N |
| Operating Temperature - Minimum | -100 Degrees F |
| Bearing Material | Carbon Graphite |
| Flow Rate @ 50 psi | 9.3 gpm |
| Discharge Type | Flange |
| Product Powered by Fossil Fuel | N |
| Shaft Material | Stainless Steel, 316 SS, 316 Stainless Steel |
| Safety Data Sheet (SDS) Applicable? | N |
| Discharge Standard | Flange |
| Storage Protection Code | A |
| Display Qty | 1 |
| Flow Rate @ 25 psi | 9.8 gpm |
| Display Sell UOM | EA |
| Bearing / Bushing | Carbon Graphite Bearing |
| Gear Material | 316 SS, 316 Stainless Steel |
| Inlet | 3/4 in Flange |
| Contains California Prop 65 Carcinogen | N |
| Gear Design | Spur |
| Flow Rate @ 75 psi | 8.7 gpm |
| Series | ECO Series GC6 |
| Discharge Diameter | 3/4 in |
| Required Horsepower | 1-1/2 hp |
| Chemical Compatibility | Nitric Acid 10% Solution, Methyl Ethyl Ketone, Sulfuric Acid 80%, Sulfuric Acid 40%, Sodium Hypochlorite 5%, Acetic Acid 80%, Hydrochloric/Muriatic Acid 20%, Nitric Acid, Sodium Fluoride 5%, Hydrochloric Acid 30%, Sodium Hydroxide 50%, Ethanol, Ammonia Liquid, Hydrofluoric Acid 75%, Sodium Bisulfate 30%, Sodium Hydroxide 10%, Sulfuric Acid 100%, Muriatic Acid, Paint Thinner, Aluminum Sulfate 15%, Caustic (Sodium Hydroxide), Sodium Bisulfate, Ethylene Glycol, Methanol, Phosphoric Acid 60%, Isopropyl, Kerosene, Sodium Bisulfite, Deionized Water, Sulfuric Acid 90%, Sulfuric Acid 50%, Sulfuric Acid 10%, Ethanol (Cold Ethanol Extraction), Potassium Hydroxide 50%, Isopropanol, Formaldehyde 40%, Sodium Bicarbonate 10%, Hydrochloric Acid 20%, Chromic Acid 30%, Sodium Fluorosilicate 6%, Sulfur Dioxide 5%, Sodium Hydroxide 80%, Sodium Hydroxide, Sodium Bicarbonate, Anhydrous Ammonia, Sodium Hypochlorite 20%, Sodium Sulfite 20%, Hydrochloric Acid 100%, Acetic Acid 20%, Calcium Fluoride 0.15%, Fluorosilicic Acid 25%, Chromic Acid 5%, Sodium Carbonate 22%, Phosphoric Acid 70%, Heptane, Hydrofluoric Acid 20%, Bleach, Aluminum Sodium Sulfate 15%, Calcium Carbonate 65%, Sulfuric Acid 75% to 100%, Phosphoric Acid 100%, Mineral Oil, Ammonia Aqueos 35%, Calcium Carbonate, Hydrofluoric Acid, Hydrochloric Acid, Sulfuric Acid 60%, Methyl Chloride, Sulfuric Acid 20%, Magnesium Hydroxide 12%, Calcium Chloride, Citric Acid 50%, Citric Acid, Sulfuric Acid 10% to 75%, Hydrochloric Acid 10%, Acetic Acid (Glacial), Sodium Hypochlorite, Propionic Acid, Hydrofluorosilicic Acid 25%, Salt Water, Formaldehyde, Phosphoric Acid 40% Solution, Formic Acid, Chromic Acid, Hydrochloric/Muriatic Acid 37%, Sodium Hypochlorite 10%, Calcium Hydroxide 0.15%, Stearic Acid, Phosphoric Acid 40%, Phosphoric Acid 80%, Naphtha, Hydrofluoric Acid 100%, Magnesium Sulfate 25%, Sulfuric Acid 70%, Sulfuric Acid up to 10%, Sulfuric Acid 30%, Phosphoric Acid 90%, Fresh Water, Hydrochloric/Muriatic Acid 100%, Fungicides, Acetone, Chromic Acid 10%, Ethyl Acetate, Chromic Acid 50%, Nitric Acid 20% Solution, Hydrazine, Sodium Hydroxide 20%, Ammonium Hydroxide, Phosphoric Acid, Hydrochloric Acid 40%, Calcium Chloride 2.5%, Ammonium Sulfate 50%, Alcohol, Hexafluorosilicic Acid 35%, Mineral Spirits, Phosphoric Acid 50%, Hexane, Nitric Acid 50% Solution, Hydrochloric Acid 37%, Potassium Hydroxide |
| Freight Class Code | 39 |
| Operating Pressure - Maximum | 150 psi |
| Inlet Diameter | 3/4 in |
| Ozone Depleting Substance | N |
| Flow Rate @ 100 psi | 8.3 gpm |
| For Motor Frame Size | 56C |
| Manufacturer Part Number | GC6-UAE-ELU |
| Shaft Material Stainless Steel Grade | 316 |
| Should Sales be Restricted by Region? | N |
| Operating Temp. Range | -100 Degrees F to 450 Degrees F |
| Viscosity - Maximum | 100 cps |
| Ports | 3/4" Flange |
| O-Ring Material | TFE |
| Motor Mounting Type | Close Coupled |
| Contains California Prop 65 Reproductive Toxicant | N |
| For Motor Speed - Maximum | 1,725 RPM |
| Gear Pump Type | External |
| Mfr. Model # | GC6-UAE-ELU |
Description
Rotary Gear Pump Head, SPN GC6-UAE-ELU