Tekton 13 Piece Short Arm Ball End Hex L-Key Set with Holder 0.050"-3/8"

Description

Features

• Short arm optimizes for access - stay close to the fastener with the short arm l-key that allows you to work in tighter spaces and with greater control
• High leverage - we designed the keys to be longer in the largest sizes to increase leverage where it matters
• Tight fit with fasteners - we precisely manufacture our hex key geometry on the large end of the applicable range resulting in less slop in fasteners

Two measures of tolerance control - we measure our hex key tolerances in two ways from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency

20° ball angle increases access - our keys implement a steep ball end angle that increases your ability to access fasteners while still maintaining sufficient strength

Refined edges - tekton keys have slightly chamfered edges (except sizes that are too small to be chamfered 1.3 mm 1.5 mm 2 mm 0.050 in. 1/16 in. And 5/64 in.) and a smooth top face to optimize engagement with fasteners

Made from 8660 steel - we make our keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC to produce tools that are hard but not brittle

Corrosion-resistant finish we coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. To test the finish of our keys we wipe them with isopropyl alcohol to remove oil then submerge them in a 1% saltwater solution for 45 hours. The keys are then rinsed with tap water and air dried

Clear markings - with the exception of the smallest sizes tekton l-key sizes are marked in two ways-with a high-visibility laser marking and a stamped marking

Quick access - we designed the holder to organize the l-keys facing forward so you can easily access each tool without having to move others out of the way

Self-aligning key slots - the slots are uniquely shaped to guide the head of each l-key into alignment with the others

Du