Transforming Technologies Table Mat Grounding Kit 1 CP2522 Ground Cord 1 Ground Snaps CS1090

Description

Transforming technologies GK1000 esd table mat grounding kit offers the hardware required by ansi/esd S-6.1 and ANSI/ESD-S20.20 to ground an esd table mat

The CP2522 is a low profile common point ground with two banana jacks which allow two workers the ability to plug into onto one ground point. The molded connection point houses a 1 meg ohm 1/4 watt resistor.

The ground cord attaches to table mats via the CS1090 universal snap kit. The CS1090 universal snap kit includes a 10 mm stud 10 mm socket threaded backing washer conical nut long screw short screw and esd common point ground label. Everything needed to install a stud or socket on all soft materials up to 0.375" thick.

Screws are 6-32 flat head phillips machine screws; one 0.25" long and one 0.375" long. Punch a hole through the mat and screw on the socket or stud whichever is preferred. All that is needed is a phillips screwdriver

Esd standards require 1 ground point per mat or every 10ft of esd matting.

Meets or exceeds requirements of ANSI ESD-S20.20 and ansi/esd S-6.1.