Transforming Technologies Universal Snap Kit Pack of 10

Description

The transforming technologies CS1090 esd universal snap kit includes everything needed to field-install a stud or socket on all soft materials up to 0.375" thick. The kit includes both a 10 mm stud 10 mm socket threaded backing washer conical nut long screw and short screw. Screws are 6-32 flat head phillips machine screws; one 0.25" long and one 0.375" long.

To install punch a hole through the mat with the screw driver or knife and screw on the socket or stud whichever is preferred. All that is needed is a phillips screwdriver.

Instructions

Determine the position of the grounding snap (one only per mat) and type of fastener you will be installing (socket or stud)

Punch a hole through the material with a small phillips screwdriver or awl

Select one of the screws as follows material less than 0.100" thick

Short screw. Material greater than 0.100" thick

Long screw

Insert the screw through the top on the snap stud or socket the washer and the material. Affix the assembly with the conical nut supplied with the kit and tighten down the screw using a phillips screwdriver

Remaining will be either a 10mm stud or socket and either a long or short screw to be discarded or saved for another application