Wetend Kit: DB10V-W-T-FF, 8/25 hp Sized for Horsepower, PVDF, PVFD, 1 1/2 in Flange
In Stock
$1,707.00
Save 13%
$1,491.36
/each
Earn 1491 points for this item
($14.91 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Wetend Kit: DB10V-W-T-FF, 8/25 hp Sized for H...
Mfr # DB10V-W-T-FF
$1,491.36
Customers Also Viewed
No related products found.
Product Details
| Brand | FINISH THOMPSON |
| Product Type | Wetend Kit |
| Discharge Gender | Male |
| Standards | EN ISO 12100, CE, EN 809 |
| Compatible with Pump Type | Chemical Transfer Magnetic Drive Pump |
| Best Efficiency Head | 44 ft |
| Inlet Gender | Female |
| Pump Drive Configuration | Close-Coupled |
| Ozone Depleting Substance | N |
| Manufacturer Part Number | DB10V-W-T-FF |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Max Ambient Temperature | 220 Degrees F |
| Display Sell UOM | EA |
| NPSHr | 8 ft |
| Shutoff Pressure | 21.6 psi |
| Priming | Manual |
| Discharge Rotation Increments | 0 Degrees |
| For Manufacturer Part Number | DB10V-T-FF-M207 |
| Shaft Seal Material | FKM |
| Inlet Diameter | 1-1/2 in |
| Overall Length | 17.12 in |
| Overall Width | 12.03 in |
| Discharge Diameter | 1-1/2 in |
| Solid Diameter (Maximum) | 0.016 in |
| Shaft Material | Ceramic |
| Pump Housing Material | PVDF |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet Standard | Flange |
| Impeller Material | PVFD |
| Max Specific Gravity | 1.8 |
| Motor Efficiency Class | Standard Efficient |
| Compatible with Brand | Finish Thompson |
| Min Flow | 0.5 gpm |
| Volute Material | PVDF |
| Overall Height | 16.46 in |
| Impeller Diameter | 3.75 in |
| Contains California Prop 65 Reproductive Toxicant | N |
| Max Suction Lift | 0 ft |
| NEMA Nominal Efficiency | 0.0 |
| Impeller Design | Closed |
| Discharge | 1-1/2 in NPT |
| Sized for Horsepower | 8/25 hp |
| Pump Shaft Rotation Direction | CW |
| Storage Protection Code | A |
| Viscosity (Maximum) | 150 cps |
| Chemical Compatibility | Acetic Acid 80%, Water, Calcium Chloride, Citric Acid 50%, Hydrogen Peroxide 1% to 50%, Fertilizer, Nitric Acid 70%, Sodium Bisulfate, Phosphoric Acid 40%, Ethylene Glycol, Sodium Bisulfite, Sodium Hypochlorite 12.5%, Sulfiric Acid 1% to 98%, Deionized Water, Sodium Bicarbonate 10%, Chromic Acid 10%, Antifreeze, Ammonium Hydroxide, Herbicide, Fungicide, Saltwater, Acetic Acid 20%, Transmission Fluid |
| Motor Speed (Maximum) | 3,450 RPM |
| Is this a Hazardous Material Product? | N |
| Manufacturers Warranty Length | 5 yr |
| Compatible Grainger Part Number | 420WL8 |
| Shaft Seal Type | Sealless |
| Best Efficiency Flow | 60 gpm |
| Discharge Standard | NPT |
| Freight Class Code | 260 |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Inlet | 1-1/2 in Flange |
| Product Powered by Fossil Fuel | N |
| Flow Rate (Maximum) | 40 gpm |
| Media Temperature - Maximum | 220 Degrees F |
| Motor Efficiency Compliance Certification Number | 000000 |
| Should Sales be Restricted by Region? | N |
| California Biodegradable Labeling Compliance | N |
| Shaft Outside Diameter | 3/8 in |
| Display Qty | 1 |
| Pumping Application | Liquid Transfer, Chemical Transfer |
| Contains California Prop 65 Carcinogen | N |
| Feet of Head (Maximum) | 50 ft |
| Motor Efficiency Regulation Applicable | Y |
| Mfr. Model # | DB10V-W-T-FF |
Description
Wetend Kit, Manual, 8 ft, PVFD, 1-1/2 in