Wright® Steel Front Dump Self Dumping Hopper 1 Cu. Yd. 6000 lb. Capacity Gray

Description

Our front dump hoppers are designed for forward dumping efficiency in tight workspaces. Built for safety and ease of use operators simply unlock the latch attach the safety chain and push the hopper forward-automatically engaging the front door for clean dumping. Once complete the hopper rolls back and re-latches on its own ready for the next load. Safety and precision in one streamlined solution.

Dumping hopper

Keeping the mast tilted back unlock the safety latch and attach the safety chain to the mast of the forklift

Raise forks to desired dumping height/position

Then remaining clear of hopper (especially rocker area) drive slowly toward the edge of the roll-off bin/container

Slightly tilt the mast forward and release the handle to engage the hopper. Once engaged the hopper will tilt forward and the front door will open allowing contents to dump

Safe operating instructions & precautions for front dump hoppers

Latch holder latch should be locked in position except when dumping

Picking up hopper insert forks into the opening of the base spreading forks as far as possible. Forks should not extend past the front of the base

Transporting hopper lift with forks and tilt mast back to prevent slippage. Transport one unit at a time keeping the hopper at a minimum practical height

Relatching hopper to relatch and move the hopper into upright position set the hopper straight down on the ground and the hopper will roll back and latch. Once completed make sure the safety latch is in a locked position

Additional precautions

Before and during dumping ensure the area is clear of debris and people

Do not exceed capacity of lift truck hopper or operator

Never use hopper in need of repairs